SAPRO P1

Multi-purpose hot melt adhesive on the base of synthetic resins

Multi-purpose packaging hot melt adhesive  based synthetic resins, is used in a wide range of packaging applications, such as carton sealing, tray erection, ream wrapping and assembly of difficult substrates. Specially designed for gluing paper to paper and gluing paper handles to kraft bags.

This product compared to EVA adhesive has an improved thermal stability, stays constant in its viscosity, therefore no changes in the adhesion and in the processing quality, even by longer rests in the adhesive melting machines.

Low consumption adhesive, with extremely low density,

Odour, smoke and organic solvents free adhesive.

Application: can be used in nozzle, roller or other applicator system. Temperatures above 190 °C should be avoided. The equipment needs to be freed from EVA hot melt and cleaned since this product is not compatible with EVA based hot melts.  During extended machine stops it is recommended to switch off the heating.

Storage conditions: glue should be stored in a closed original package under normal cool and dry storage conditions, should be protected from direct sunlight. In such conditions glue can be stored for at least 36 months without negative impact on it’s quality.

SAPRO P2

Hot melt adhesive on the base of synthetic resins Multi-purpose packaging hot melt adhesive SAPRO P2 based synthetic resins, is used in a wide range of packaging applications, such as carton sealing, tray erection, ream wrapping and assembly of difficult substrates.

SAPRO P5

Latest-generation multi-purpose packaging hot melt

Latest-generation hot melt SAPRO P5 is multi-purpose packaging adhesive which is used in a wide range of packaging applications, such as carton sealing, tray erection, ream wrapping and assembly of difficult substrates. Also it suitable for bookbinding and ceramic tile packaging. One adhesive can perform in several different applications.

Depending on substrates, this product can allow bonds with heat resistance up to +70 °C and cold resistance down to -25 °C. It was especially developed for packaging applications where high heat resistance is needed.  It is characterized by: good hot tack, long open time and short setting time, improved adhesion properties and excellent thermal stability that allow to reduce the consumption at least 50%, depending on application, in comparison with other adhesives.

This product compared to EVA adhesive has an improved thermal stability, stays constant in its viscosity, therefore no changes in the adhesion and in the processing quality, even after long resting time in the adhesive melting machines.  Resistant to viscosity change resulting in clean machining hour after hour.

Hot melt SAPRO P5 is used for:

• Book binding;
• Assembly and closure of cardboard and corrugated base paper;
• Manufacturing of fruit boxes;
• Formation  and closure of boxes of food and industrial products;
• Formation and closure of tile boxes,
• Ceramic tile packaging.

Properties of hot melt adhesive SAPRO P5 :

• Quick tack, even when hot;
• Versability. Good adhesion to difficult substrates;
• High resistance to heat;
• Very high thermal stability;
• High Cohesion, even when hot;
• Good adhesion to difficult substrates;
• Low consumption adhesive, with extremely low density;
• Clean machining, no stringing and failing;
• Odour and smoke-free;
• Not-toxic;
• Long storage life;
• Convenience of storage.

Application: can be used in the nozzle, roller or another applicator system. Temperatures above 190 °C should be avoided. The equipment needs to be freed from EVA hot melt and cleaned since this product is not compatible with EVA-based hot melts. During extended machine stops it is recommended to switch off the heating.

Storage conditions: glue should be stored in a closed original package under normal cool and dry storage conditions and protected from direct sunlight. In such conditions glue can be stored for at least 36 months without negative impact on its quality.